B680H Barrier Gate Operator; Technical Specifications - FAAC B680H Mode D'emploi

The B680H barrier gate operator system consists of a white
aluminium arm with reflectors and optional lights, a steel upright
profile and a metal cover. The operator is mounted on the upright
profile and it's made with a hydraulic unit and two plunging pistons
connected to it, which, by means of a rocker arm, rotate the arm.
The arm weight is balanced with a spring fitted on one of the two
plunging pistons. The electronic control equipment is also housed
on the upright profile, inside a transparent plastic compartment,
The whole operator is protected by the external metal cover.
The system features an adjustable electronic anti-crushing safety,
a device that guarantees stopping and locking of the arm in any
position, and a convenient manual release for use in case of
power outage or malfunction.

1. TECHNICAL SPECIFICATIONS

Main AC supply
Electric Motor
Power rating
Current rating
Motor rotation speed
Pump fl ow capacity
Yielded torque
Oil type
Oil quantity
Anti-crushing System
Deceleration type
Operating ambient temperature
Rated Operating Time (ROT)
Surface protection treatment
Arm type
Protection Class
Weight (body + cover)
Opening and closing times
including deceleration
Fig. 1 References
Built-in fl ashing lamp
Electronic control board
Oil fi lling cap
Right piston bleeder screw
Hydraulic unit
Right plunging piston
Built in heatsink
Right hydraulic hose
Fig. 2 References
Support structure
Mechanical stops
Rocker arm
Drive shaft
B680H

B680H BARRIER GATE OPERATOR

100-240 Vac / 50-60Hz
36Vdc Brushless
240W
1.1A at 230 Vac
1000-6000 rpm
3,2 l/min (max)
0-273 lbf.ft (0-370 Nm)
FAAC HP OIL
1.27 Qt (1.2 Lt)
Electronic with absolute encoder
Electronic with absolute encoder
-4 °F +131 °F (-20 °C +55 °C)
Continuous Duty at 131 °F (55 °C)
EP SL LF PRIMER
Rounded with lights and rubber bumper
IP56
143+44 lb (65+20 Kg)
1.5 s - 7.5 ft (2.3m) arm
6.0 s - 27 ft (8.3m) arm
Left hydraulic hose
Release lock
Left plunging piston
Left piston bleeder screw
Cover
Encoder
Power Switch
Switching power supply
Mounting plate
Spring guide
Balance spring
Preload adjustment ring nut
6
N L1
Fig. 1 Fig. 1
Fig. 2 Fig. 2
532159 - Rev.C