Measuring Blood Pressure - Sanitas SBC 24 Mode D'emploi

Masquer les pouces Voir aussi pour SBC 24:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Note: If you hold down M, you can set the values faster.
• Press
and M simultaneously. The month starts flashing. Using
the M button, set the month 1 to 12 and confirm with
• Set the day, hour and minute and confirm in each case with

5. Measuring blood pressure

Positioning cuff
1
2
• Bare your left wrist, making sure that the circulation in the arm is
not restricted by any clothes etc. that are too tight. Position the
cuff on the inside of your wrist.
• Fasten the cuff with the Velcro fastening so that the upper edge
of the monitor is positioned approx. 1 cm below the ball of your
thumb.
• The cuff has to be fitted tightly around the wristbut should not
constrict it.
Important: The instrument should only be operated with the original
cuff.
All manuals and user guides at all-guides.com
.
.
3
Correct posture
• Rest for approx. 5 minutes before each measurement. Otherwise
there may be divergences.
• You can perform the measurement while sitting
or lying. To carry out a blood pressure
measurement, make sure you are sitting
comfortably with your arms and back leaning
on something. Do not cross your legs. Place
your feet flat on the ground. Make sure to rest
your arm and move it. Always make sure that the cuff is at heart
level. Otherwise significant deviations can occur. Relax your arm
and the palm of your hand.
• In order not to distort the result, it is important to keep still during
the measurement and not talk.
Measuring blood pressure
• Start the blood pressure monitor with the
display check, during which all numbers light up, the cuff pumps
up automatically.
• Cuff air pressure is released slowly.
If a tendency towards high blood pressure is already detectable,
the cuff is pumped up again and cuff pressure increased further.
As soon as a heart rate is detected, the heart rate symbol
displayed.
• Systolic and diastolic pressure are alternately displayed with the pulse.
• You can interrupt measurement at any time by pressing the
16
• • • • • • • • • • • • •
button. Following the
is
button.

Publicité

Table des Matières
loading

Table des Matières