Sanitas SBC 41 Mode D'emploi page 20

Measurement
inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating
conditions
Permissible storage
conditions
Power supply
Battery life
Accessories
Classification
All manuals and user guides at all-guides.com
Max. permissible standard devia-
tion according to clinical testing:
systolic 8 mmHg /diastolic
8 mmHg
60 memory spaces
L 86 mm x W 70 mm x H 28 mm
Approx. 105 g (without batteries)
14.0 to 19.5 cm
+5 °C to +40 °C, ≤ 90 % relative air
humidity (non-condensing)
-20 °C to +55 °C, ≤ 95 % relative
air humidity, 800 – 1050 hPa ambi-
ent pressure
2 x 1,5 V AAA batteries
For approx. 180 measurements,
depending on the blood pressure
level and/or pump pressure
Instruction for use, 2 x 1.5 V AAA
batteries, storage box
Internal supply, IPX0, no AP or
APG, continuous operation, type
BF applied part
Technical information is subject to change without notifi-
cation to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this unit. More details can be requested
from the stated Customer Service address or found at
the end of the instructions for use.
• This device is in line with the EU Medical Devices
Directive 93/42/EC, the "Medizinproduktegesetz"
(German Medical Devices Act) and the standards
EN 1060-1 (non-invasive sphygmomanometers, Part 1:
General requirements), EN 1060-3 (non-invasive sphyg-
momanometers, Part 3: Supplementary requirements
for electro-mechanical blood pressure measuring sys-
tems) and IEC 80601-2-30 (Medical electrical equip-
ment – Part 2 – 30: Particular requirements for the
safety and essential performance of automated non-
invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical
purposes, it must be regularly tested for accuracy by
appropriate means. Precise instructions for checking
accuracy may be requested from the service address.
20