Installer Menu (Hob Power Settings) - Franke MARIS FMA 839 HI Manuel D'utilisation

INSTALLER MENU (HOB POWER SETTINGS)

When first connecting to the domestic power supply, the installer must set the power of the hob cooking areas
based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using
access the menu.
- When the power is first turned on, the symbol
- Press and hold .
- Press the 4 Digits for the cooking areas (
the one on the right. A beep sounds each time you press, and when button
Digit will alternately display
Digit will display
- Press Digit and number 8 on the power bar to access the settings menu. The operation is
confirmed by the fact that the display changes from (
power settings menu.
Press Digit and select one of the values displayed in the power bar (0-1-2-3) following the table
provided below.
Once the correct value has been entered, confirm by pressing and holding
received.
FMA 839 HI
) one at a time in an anticlockwise direction, starting from
and .
.
, otherwise, follow the operations below to
flashes.
and ) to ( and
Kw
7.4 Kw
4.5 Kw
3.5 Kw
2.8 Kw
– 19 –
is released it shows:
). We are now in the hob
until confirmation is
EN