To activate: select one of the 4 cooking areas and press
Hotplate
The Digit for the selected area will show
function
to keep food warm
To deactivate: press
Both the cooking areas and the Hood can be set to extra power.
To activate: both for the hood and for the cooking areas, press " 9 " on the power bar
Turbo function
2 times. The corresponding Digit displays
To deactivate: select one of the other possible values on the power bar.
Select one of the 4 cooking areas and press and hold for 3 seconds on the selected
value (from 1 to 8) on the power bar.
The hob will peak at maximum power for a given time before returning to the set
power (See table below).
The Display shows " A " plus the selected value.
1 -> 40 seconds
2 -> 72 seconds
Quick heating
3 -> 120 seconds
function
4 -> 176 seconds
5 -> 256 seconds
6 -> 432 seconds
7 -> 120 seconds
8 -> 192 seconds
9 -> not available
P -> not available
This function freezes all the hob settings for approximately 10 minutes if the
person using the hob needs to go away for a short time.
During the pause :
Function
When the 10 minutes are up, the hob will continue with all the actions that were
Pause + Restart
set previously.
To activate: press and hold
To deactivate: press and hold
other button within 10 seconds.
This function is used to recall all the hob function settings in the event of
involuntary shut-down or a sudden power cut.
When the hob is turned off, if it is not turned on again within 6 seconds using
Recall Function
the
ctions set previously. A beep sounds to confirm the operation.
With the hob turned off, if it is turned on again within 6 seconds the previous function
settings are recovered automatically.
FMA 839 HI
or press
- No energy is being used in any of the cooking areas.
- All the Timers are stopped.
- The "Turbo" and "Quick Heating" functions are deactivated
button will flash for 6 seconds. Press the button again to recover the fun-
– 15 –
.
.
.
for at least 1 second. All the Digits indicate
for at least 1 second until it flashes. Press any
.
.
,
EN