Control Panel Description; Preparing For Use; Assembling The Device - Steinberg Systems SBS-LZ-5000LS Manuel D'utilisation

Note: The power socket is located on the back of the device (not shown in
the figure above).

CONTROL PANEL DESCRIPTION

1. Display
2. Timer display
3. Lid release button
4. RCF button
5. "Up" button for speed settings
6. "Down" button for speed setting
7. "Up" button for run time setting
8. "Down" button for run time setting
9. Device operation LED
10. Device stop LED
11. START button
12. STOP button
3.2.

Preparing for use

APPLIANCE LOCATION
The ambient temperature must not exceed 45°C and the relative humidity should
not exceed 85%. Only use the device in well-ventilated areas. Do not obstruct the
air outlet of the device. Keep the device away from any hot surfaces. The device
should always be used when positioned on an even, stable, clean, fireproof and
dry surface, and be out of the reach of children and persons with limited mental
and sensory functions. The valve that disables the compressed air supply should be
immediately accessible from the area where the device is being used. Make sure
that the pressure of the air supplying the device does not exceed the
recommended range!

ASSEMBLING THE DEVICE