Electrical Safety - Steinberg Systems SBS-LZ-5000LS Manuel D'utilisation

PLEASE NOTE! Drawings in this manual are for illustration purposes only
The original operation manual is written in German. Other language versions are
2. Usage safety
ATTENTION! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury or even
death.
The terms "device" or "product" are used in the warnings and instructions to refer to <
ELECTRIC CENTRIFUGE >..
2.1.
a) The plug must fit the socket. Do not modify the plug in any way. Using
original plugs and matching sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes, heaters, boilers and
refrigerators. There is an increased risk of electric shock if the earthed
device is exposed to rain, comes into direct contact with a wet surface or
is operating in a damp environment. Water getting into the device
increases the risk of damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it to carry the device
or to pull the plug out of a socket. Keep the cable away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cables increase the
risk of electric shock.
e) If using the device in a damp environment cannot be avoided, a residual
current device (RCD) should be applied. The use of an RCD reduces the risk
of electric shock.
f) Do not use the device if the power cord is damaged or shows obvious signs
of wear. A damaged power cord should be replaced by a qualified
electrician or the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord, plug or device in water
or other liquids. Do not use the device on wet surfaces.
h) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device
in water or other liquids.
and in some details may differ from the actual product.
translations from the German

Electrical safety

.