Steinberg Systems SBS-LZ-5000LS Manuel D'utilisation page 20

d) When working with the device, use common sense and stay alert. Temporary
loss of concentration while using the device may lead to serious injuries.
e) Use personal protective equipment as required for working with the device,
specified in section 1 (Legend).
The use of correct and approved personal protective equipment reduces the
risk of injury.
f) To prevent the device from accidentally switching on, make sure the switch is
on the OFF position before connecting to a power source.
g) Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away
from moving parts. Loose clothing, jewellery or long hair may get caught in
moving parts.
h) The device is not a toy. Children must be supervised to ensure that they do not
play with the device.
i) Do not put your hands or other items inside the device while it is in use!
2.4. Safe device use
a) Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
b) Disconnect the device from the power supply before commencement of
adjustment, cleaning and maintenance. Such a preventive measure reduces
the risk of accidental activation.
c) When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for any
other conditions which may impact the safe operation of the device. If damage
is discovered, hand over the device for repair before use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g) To ensure the operational integrity of the device, do not remove factory-fitted
guards and do not loosen any screws.
h) When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be used.
a) Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.