Memory Function; Warning Display - Linea Domo B3990 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

www.domo-elektro.be
B3990

MEMORY FUNCTION

Should a power failure occur during the course of the selected baking programme,
the baking process will restart after 10 minutes even without pressing the START/
STOP button. If the power failure lasts longer than 10 minutes the memory function
is lost. All ingredients should be removed from the baking tin and re-inserted and the
breadmaker restarted. If the dough had not already started to rise during the power
failure you can immediately press the START/STOP button and start the programme
from the beginning again.
LOCKING FUNCTION CONTROL PANEL
You can lock the control panel by first pressing the CYCLE button and then pressing
the COLOUR button.
Once the control panel is locked, no control button except the CYCLE and COLOUR
button can be used. Thanks to this function the baking process cannot be interrupted
unintentionally and children cannot change any of the breadmaker's selected settings
if you are not present. If you do not use this function the control buttons will be locked
five minutes after the baking programme starts.
You must first unlock the appliance manually if you want to operate the breadmaker's
settings.
ENVIRONMENT
This breadmaker will work well in any temperature, but different sizes may be
produced if the appliance is used in a very hot or very cold room. The recommended
temperature varies but lies between 15°C and 34°C.

WARNING DISPLAY

1. If on the display "H HH" appears after pressing the START/STOP button, it is an
indication that the machine's inside temperature is too high. The baking programme
should be stopped. Open the lid and allow the breadmaker to cool down for 10 to 20
minutes.
2. If on the display "E E0" or "E E1" appear after pressing the START/STOP button,
the temperature sensor is not working correctly. Make sure you have the machine
checked by a qualified person.
FOR FIRST TIME USE
If you are using the breadmaker for the first time you may detect smoke and a
particular odour. This is perfectly normal and will pass. Make sure that air is allowed
to circulate adequately/freely around the appliance.
1. When unpacking check to make sure that all parts and accessories have been
included and that there is no damage to the appliance.
2. Clean all parts as described in the instructions "Maintenance and cleaning".
3. Select the BAKE setting and bake for 10 minutes without placing anything in the
55

Publicité

Table des Matières
loading

Table des Matières