HP AMP Mode D'emploi page 2

Wireless setup help
Go to 123.hp.com to download and install the HP Smart app or printer software. Both the app and software will
help you connect to your wireless network (2.4 GHz supported).
Tip: Press and hold the Power button to light up all the buttons on the control panel.
Print Wireless Quick
Start Guide
Restore wireless
settings
Connect printer through
Wi-Fi Protected Setup
(WPS) mode
Print Network Test
Report and Network
Configuration Page
Visit the HP Wireless Printing Center at www.hp.com/go/wirelessprinting.
Note: Only use a USB cable during software installation if and when you are prompted to do so.
Note for Windows® users: You may also order a printer software CD. Please visit www.support.hp.com.
Share the printer with computers and other devices on your network
After connecting the printer to your wireless network, you can share it with multiple computers and mobile devices
on the same network. On each device, install the HP Smart app or printer software from 123.hp.com.
Convert from a USB connection to wireless connection
Learn at: www.hp.com/support/amp100.
Use the printer wirelessly without a router (Wi-Fi Direct)
Learn at: www.hp.com/go/wifidirectprinting.
This product is designed for use in open environments (e.g., in homes and not connected to the public Internet) in
which anyone may access and use the printer. As a result, the Wi-Fi Direct setting is in "Automatic" mode by default,
without an administrator password, which allows anyone in wireless range to connect and access all functions and
settings of the printer. If higher security levels are desired, HP recommends changing the Wi-Fi Direct Connection
Method from "Automatic" to "Manual" and establishing an administrator password.
Basic troubleshooting
• Make sure you have installed the latest HP Smart app or printer software from 123.hp.com.
• If your computer is connected to the printer with a USB cable, make sure the USB connections are secure. If your
computer is connected to the printer with a wireless connection, confirm that the wireless connection is working.
• Visit the HP Diagnostic Tools website at www.hp.com/go/tools to download free diagnostic utilities (tools) that
you can use to fix common printer problems.
Learn more
Product support
www.hp.com/support/amp100
Safety information
Use only with the power cord and power adapter (if provided) supplied by HP.
Regulatory Model Number:
Number. The Regulatory Model Number for your product is SNPRH-1701. This regulatory number should not be
confused with the marketing name (HP AMP, etc.) or product numbers (T8X39A, etc.).
2
Press and hold the Information button for three seconds.
Press and hold the Wireless and Cancel buttons at the same time
+
until the Power button starts blinking for a few seconds, and then
the printer is ready to connect to network.
Press and hold the Wireless button until it starts blinking, and then
press the WPS button on your router. When the Wireless button
remains lit, the printer is connected.
+
Press the Information and Wireless buttons together.
HP mobile printing
www.hp.com/go/mobileprinting
For regulatory identification purposes, your product is assigned a Regulatory Model
Get additional help and find notices, environmental,
and regulatory information, including the European
Union Regulatory Notice and compliance statements,
in the "Technical Information" section from User Guide
at: www.hp.com/support/amp100.
Printer registration: www.register.hp.com.
Declaration of Conformity: www.hp.eu/certificates.
Ink usage: www.hp.com/go/inkusage.