Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. REINSTALL BOTTOM PANEL
Ensure not to pinch the wires when reinstalling the bottom panel.
Remove protective plastic film covering filters before installing them.
7.1 Reinstall the bottom panel, using 9 screws saved
from steps 3.4 and 3.5, as shown at right.
NOTE: The left side panel will hide one screw.
7.2 Reconnect light assemblies. Reinstall side panels
using 4 screws saved from step 3.2.
CAUTION
Do not reinstall the transport bracket.
7.3. Reinstall filters.
8. LIGHT BULBS
This range hood requires two 120 V, 50 W max., type MR16 with GU10 base, shielded halogen bulbs (included).
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk
of personal injury, only install shielded halogen lamps. Also, never install a cool beam, a dichroic
lamp, a lamp not suitable for use in recessed luminaires or identified for use in enclosed fixtures.
To replace bulbs:
1. Gently push upward and turn counterclockwise to
disengage used bulb leads from their grooves.
2. Place the new bulb leads into their grooves in the
socket.
3. Gently push upward and turn clockwise until
secured.
NOTE: If need be, use a rubber dishwashing glove to
add grip when removing the bulb.
CAUTION
CAUTION
HD0404
WARNING
!
1
HO0089
- 11 -
2
3
Publicité
Chapitres
Table des Matières
