Broan Elite E661 Serie Guide D'installation page 8

3. PREPARE HOOD
F V D
OR ERTICAL ISCHARGE
3.11 Turn the hood over and remove the metal shutoff plate from the
back of the hood, by removing its 3 retaining screws. Set the
screws aside.
3.12 Using a straight-blade screwdriver, remove the discharge knock-out. To ease removal, use a long nose pliers for
the third step. See figures below.
Never use a hammer and a screwdriver to punch out the discharge
knock-out, because this will damage the hood internal parts.
1
HR0066
3.13 Using the 3 screws removed from 3.11, install the metal shutoff
plate on the back of the hood.
(CONT'D)
O :
NLY
CAUTION
2
- 8 -
HO0169
HR0067
3
HO0031