Broan Elite E661 Serie Guide D'installation page 6

3. PREPARE HOOD
3.5 Remove the 9 screws retaining the bottom panel to the hood and
set aside. Slide out the bottom panel and set aside.
NOTE: Wires not shown in illustration to ease understanding.
F V D
OR ERTICAL ISCHARGE
Go to step 3.11 on page 8.
F H D
OR ORIZONTAL ISCHARGE
3.6 From inside the hood, remove and discard the plastic air deviator following the 4 steps below.
A
HO0154
Unfold both fan scroll tabs.
C
HO0156
Slide the plastic deviator out and discard.
(CONT'D)
:
O :
NLY
W
HEEL
T
AB
HO0168
- 6 -
S
HO0159
B
HO0155
Lift the blower wheel to remove and set aside.
D
HO0155
Reinstall blower wheel ensuring its tab is
aligned with the yellow sticker affixed on the
motor. (As illustrated below.)
L
CREW OCATIONS