Loading The Mixer Onto A Vehicle; Transportation - Altrad BELLE PREMIER XT Serie Manuel De L'opérateur

Fig 1
For normal site to site transporting, the usual method of loading into a pick-up truck or trailer should be used. There are 2 ways that
LOADING BY FORK LIFT
- A fork socket (Fig 3) is located beneath the main frame to enable the mixer to be loaded using a Forklift (Fig 1).
- DO NOT stand underneath the machine whilst it is being lifted.
LOADING BY CRANE
- To expose the lifting eye, turn the drum so it is facing down using the handwheel (Fig 2).
- ENSURE
the mixer. See Technical Data. Ensure the lifting eye is correctly located prior to lifting the machine.
- DO NOT stand underneath the machine whilst it is being lifted.
CAUTION
SITE TO SITE TRANSPORTATION
- The mixer must be loaded onto a suitable vehicle as shown in the 'Loading the Mixer onto a Vehicle' section.
- ENSURE the mixer is suitably strapped down and secured to the vehicle.
- The mixer MUST only be transported with the drum mouth facing UPWARDS (Fig. 4 & 5)
TOWING
- These mixers are designed for to be towed on-site only maximum speed 5mph/8 kmh (Fig 6), for short periods of time.
- DO NOT tow on a public highway.
Fig 4

Loading the Mixer onto a Vehicle

Fig 2
UPWARDS

Transportation

Fig 5
MUST
11
If the fork is not the same depth
as the socket it may be necessary
to pack under the fork with wood to
keep the load stable.
Fig 3
5mph
8kmh
Fig 6
GB
GB