Seca 336 Mode D'emploi page 14

5. Operation
Correct weighing
– Press the Start key with no load on
the scale.
SE(A 88888
, and
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– Place the baby on the scale.
– Read the weighing result off the digital
display.
– To switch off the scale, press the Start
key again.
If the scale is operated with a mains unit,
the symbol appears in the display.
Automatic switch-off/economy mode
To save energy, a scale with no load on it switches off automatically after approx. 5 min-
utes. In mains operation, the scales remain switched on permanently.
Taring weight display (TARE)
The tare function is useful if an additional weight (such as cloths or a pad on the weigh-
ing surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the
scale and press the button TARE.
The note "NET" appears.
– Wait until the display stops flashing
0. 0 00
and shows
– You can now perform as many weigh-
ing operations as you like with this ad-
ditional weight.
– TARA is deactivated by pressing the
button TARE once again, or by
switching the scales off.
Important!
The maximum additional weight is 10 kg. The maximum weight which can be dis-
played is reduced by the weight of the objects already placed on the scale.
14
0. 0 00
appear con-
.