Horizon Fitness ADVENTURE 3 Guide D'utilisation page 8

USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the
headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver mode. This mode is NOT automatically activated.
When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after
15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on
the console. This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the INCLINE
navigate to SWITCH FUNCTION and press ENTER. Press ENTER to select Energy Saver mode, use
ENERGY SAVE ON or OFF. Press and hold STOP for 3-5 seconds to exit SWITCH FUNCTION. Press and hold
STOP again for 3-5 seconds to exit the engineering menu.
14
HZ14_OG_Adventure_3_5_Rev1_1.indd 14-15
key and SPEED key for 3-5 seconds. Use to
to select
PASSPORT MEDIA PLAYER
™
The Passport player, featuring Virtual Active technology, is a high-
™
definition experience that uses real destination footage and matching
ambient sounds from stunning destinations around the world. The
ultimate in workout entertainment, Passport lets you escape the
confines of a regular workout routine while enjoying a dynamic
experience.
A Passport player is available for purchase separately from your
Horizon Fitness retailer.
®
For more information, go to: www.passportplayer.com
www.horizonfitness.com
SYNCING CONSOLE WITH PASSPORT
1) Use the arrow keys on the Passport remote to scroll to the setup icon and press select.
2) Follow the on-screen prompts to press on the equipment console.
3) The message displayed on screen will notify you if the sync was a success or failure.
NOTE: See PASSPORT OWNER'S MANUAL for more information.
15
7/31/14 8:56 AM