Publicité
Les langues disponibles
Les langues disponibles
CD PROGRAMMING
You can program up to 99 tracks for MP3 disk and 20 tracks for CD disk to play in any desired
order.
Insert a disc and press "STOP" (22) (4 on remote) when it starts playing.
1.
Press "PROGRAM" BUTTON (15) (12 on remote). "P01" will be shown on the display.
2.
Press "SKIP -/+" (23/24) (3/9 on remote) to select your favorite tunes.
3.
Press "PROGRAM" BUTTON (15) (12 on remote) to store the track in the program
4.
memory. "P02" will be shown on the display.
5.
Repeat steps 3-4 to select and store all desired tracks.
Press "PLAY/PAUSE" (16) (2 on remote) to start program play.
6.
Press "STOP" (22) (4 on remote) once to stop the program play.
7.
Press "STOP" (22) (4 on remote) twice to clear program.
8.
1.
Insert the USB device's plug into the USB socket.
Select CD mode using "FUNCTION" SELECTOR.
2.
Press and hold "PLAY/PAUSE" for 2 seconds to switch to USB mode.
3.
4.
Use the same procedure as CD to listen to your USB device.
During playback, press "DEL" (11) on remote.
1.
Press "DEL" (11) on remote again to confirm.
2.
While listening to PHONO/TAPE/CD/BT, press "REC" (17 or7 on remote). "REC" will be
1.
shown on the display. The "REC" indicator will light up.
Press "REC" (17 or7 on remote) again to confirm. Encoding is performing now. Note that
2.
the encoding speed is 1:1.
Press "STOP" (22) (4 on remote) to stop recording.
3.
4.
The unit will create a folder in the USB device, that contain all recorded tracks.
PLAYBACK FROM USB
DELETE USB
RECORDING FUNCTION
6
NR916 / English Instruction Manual
Publicité
