Publicité
Les langues disponibles
Les langues disponibles
9. TROUBLESHOOTING
Trouble
The SpO
and Pulse
2
Rate can not be
displayed normally
The SpO
and Pulse
2
Rate are not displayed
stably
The device can not be
turned on
The display is off
suddenly
Possible Reason
1. The finger is not
properly positioned.
2. The patient's SpO
low to be detected.
1. The finger is not placed
inside deep enough.
2. The finger is shaking or
the patient is moving.
1. The batteries are drained
or almost drained.
2. The batteries are not
inserted properly.
3. The malfunction of the
device.
1. The product will enter
standby mode when no
signal is in the product
within 5 seconds
2.
The
batteries
almost drained.
50
Solution
1. Place the finger
properly and try again.
2. Try again;
is too
Go to a hospital for a
2
diagnosis if you are sure the
device works all right.
1. Place the finger properly
and try again.
2. Let the patient keep calm.
1. Change batteries.
2. Reinstall batteries.
3. Please contact the local
service center.
1. Normal.
2. Change batteries.
are
Publicité
