Télécharger Imprimer la page

Spengler OXYFROG Manuel Utilisateur page 43

Oxymètre de pouls

Publicité

Les langues disponibles

Les langues disponibles

recommended to be used under this circumstance.
2.4 Environment Requirements
Storage Environment
a) Temperature: -40°C~+60°C
b) Relative humidity: ≤95%
c) Atmospheric pressure: 500hPa~1060hPa
Operating Environment
a) Temperature: 10°C~40°C
b) Relative Humidity: ≤75%
c) Atmospheric pressure: 700hPa~1060hPa
3. PRINCIPLE AND CAUTION
3.1 Principle of Measurement
Principle of the Oximeter is as follows: An experience formula of data
process is established taking use of Lambert Beer Law according to
Spectrum Absorption Characteristics of Reductive Hemoglobin (Hb) and
Oxyhemoglobin (HbO
of the instrument is: Photoelectric Oxyhemoglobin Inspection Technology is
adopted in accordance with Capacity Pulse Scanning & Recording Technology,
so that two beams of different wave length of lights can be focused onto
human nail tip through perspective clamp finger-type sensor. Then measured
signal can be obtained by a photosensitive element, information acquired
through which will be shown on screen through treatment in electronic
circuits and microprocessor.
) in glow & near-infrared zones. Operation principle
2
43

Publicité

loading

Ce manuel est également adapté pour:

Cms50q1