Publicité
Les langues disponibles
Les langues disponibles
6.3 Mounting the Hanging Rope
Step 1. Put the end of the rope through the hole.
Step 2. Put another end of the rope through the first one and then tighten it.
7. OPERATING GUIDE
1 Insert the two batteries properly to the direction, and then replace the cover.
2 Open the clip as shown in Figure 5.
3 Let the patient's finger put into the rubber cushions of the clip (make sure
the finger is in the right position), and then clip the finger.
4 Press the button once on front panel.
5 Do not shake the finger and keep the patient
at ease during the process. Meanwhile, human
body is not recommended in movement sta-
tus.
6 Get the information directly from screen
display.
7 The button has two fonctions. When the
device is in standby mode, pressing the button
Figure 4. Mounting the hanging rope
Figure 5. Put finger in position
48
Publicité
