Télécharger Imprimer la page

Spengler OXYFROG Manuel Utilisateur page 40

Oxymètre de pouls

Publicité

Les langues disponibles

Les langues disponibles

not permitted. Refer to User Manual in the relative chapter for instructions
of cleaning and disinfection.
Do not have the oximeter immerged in liquid. When it needs cleaning,
please wipe its surface with medical alcohol by soft material. Do not spray
any liquid on the device directly.
When cleaning the device with water, the temperature should be lower
than 60°C.
As to the fingers which are too thin or too cold, it would probably af-
fect the normal measure of the patients' SpO
and pulse rate, please clip
2
the thick finger such as thumb and middle finger deeply enough into the
probe.
Do not use the device on infant or neonatal patients.
The product is suitable for children (Weight should be between 10kg and
40kg).
Prevent children from swallowing the product or its accessories. For
children users, please use the product under the condition of adult
guardianship
The device may not work for all patients. If you are unable to achieve
stable readings, discontinue use.
The update period of data is less than 5 seconds, which is changeable
according to different individual pulse rate.
The waveform is normalized. Please read the measured value when the
waveform on screen is equably and steady-going. Here this measured va-
lue is optimal value. And the waveform at the moment is the standard
one.
If some abnormal conditions appear on the screen during test process, pull
out the finger and reinsert to restore normal use.
40

Publicité

loading

Ce manuel est également adapté pour:

Cms50q1