Appendix 4 :Fitting Out Of The Optionnal Milling 4 Kg On The Chopin Dubois Mill - Chopin CD1 Mode D'emploi

Appendix 4 : FITTING OUT OF THE OPTIONNAL MILLING 4 KG ON THE
CHOPIN DUBOIS MILL
Standard equipement
Instruction manual 
02/2017
Laboratory Mill CD1
In order to allow the use of 4 kg wheat milling on the CD1 Mill, some
modifications are to be made on the mill itself (600 grs milling):
1.
set the feed hoppers enhancing parts and fix them with the
blocking screws.
2.
replace the receiving pans by the feed hoppers fitted with cloth
bags.
3.
set the cloth bags as indicated on attached diagram.
4.
introduce the bags ends in the plastic cans.
5.
if you use the Chopin support table, you will have to dismount
the two flaps of the table by withdrawing the 4 fixation screws of
each shelf that fix them to the rotation axis.
LIST OF THE REQUIRED SPARE PARTS
1 breaking feed hopper enhancing part.
1 reducing feed hopper enhancing part.
1 feed hopper fixation slide.
2 fixation screws.
2 feed hoppers fitted with cloth bag, breaking side.
1 feed hopper fitted with cloth bag, reducing side.
3 10 liters plastic cans
2 5 liters plastic cans
3 34 cm long bags.
Total length of
the cloth
bags:
1: 340
2: 480
3: 340
4: 340
5: 480
Equipment with 4 kg milling
GB
Enhanced
parts of fedd
hoppers
Feed hoppers
fitted with cloth
bags
51