Symbols On The Attachment And The Power Unit - RedMax LRT-EX200 Manuel D'utilisation

Noise emission to the environment
according to the European Community's
Directive. The attachment's emission is
specified in the Technical data chapter
and on the label.
Cutting unit operating cycle, operation
time/idle time.
Max 3/10 sec

Symbols on the attachment and the power unit

Careless or incorrect use of this product
can result in serious or fatal injury to the
operator or others.
Read the operator's manual carefully and
make sure you understand the
instructions before you use the
attachment.
Read the operator's manual carefully and
make sure you understand the
instructions before you use the
attachment.
Wear approved protective helmet, hearing
and eye protection.
DANGER - Keep hands away from blade.
1472 - 002 - 11.11.2020
DANGER - Keep sufficient distance away from electrical power lines. This product is not
electrically insulated. If the product touches or comes close to high-voltage power lines it
could lead to death or serious bodily injury. Electricity can jump from one point to another by
arcing. The higher the voltage, the greater the distance electricity can jump. Electricity can
also travel through branches and other objects, especially if they are wet. Always keep a dis-
tance of at least 10 m between the product and high-voltage power lines and/or any objects
that are touching them. If have to work within this safe distance you should always contact
the relevant power company to make sure the power is switched off before you start work.
The operator of the product must ensure, while working, that no persons or animals come
closer than 15 meters.
Note:
Other symbols/decals on the attachment refer
to special certification requirements for certain markets.
DANGER - Keep hands away from blade.
Keep all parts of your body away from the
hot surfaces.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
17