RedMax LRT-EX200 Manuel D'utilisation page 12

• Use Redmax special grease. Speak to your servicing
dealer for more information.
• Add the grease through the grease nipple.
CAUTION:
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note:
Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
To examine the blades
1. Remove the screw from the gearbox.
12
Do not fill the gearbox fully.
2. Put the combination wrench in the gearbox and turn
clockwise and counterclockwise. Make sure that the
blades move freely.
3. Examine the edges of the blades for damages and
deformation.
4. Use a file to remove burrs on the blades.
5. Install in the opposite sequence.
1472 - 002 - 11.11.2020