Warning Labels On The Machine; Important; Symbols On The Machine; Emission Control - RedMax TR2350S Mode D'emploi

TR2350S

3. Warning labels on the machine

( 1 ) ( 2 )
(1) Read owner/operator manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Warning! Danger of kickback.
(4) Beware of thrown objects.
(5) Warning/Attention
(6) Keep all children, bystanders and helpers 15 meters away from the brushcutter

IMPORTANT

If warning label peel off or become soiled and impossible to read, you should contact the dealer from
which you purchased the product to order new labels and affix them in the required location(s).
WARNING
Never modify your brushcutter.
We won't warrant the machine, if you use the remodeled brushcutter or you don't observe the
proper usage written in the manual.

4. Symbols on the machine

For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: AIR CLEANER COVER
(c) The direction to open the choke
Position: AIR CLEANER COVER
US-4
( 3 ) ( 4 ) ( 5 ) ( 6 )

■ EMISSION CONTROL

An emission control label is located on the engine.
EMISSION CONTROL INFORMATION
THIS ENGINE MEETS U.S. EPA AND CALI-
FORNIA EXH / EVP REGS FOR 2008*
ENGINE FAMILY : 8HQZS.0224BF*
EMISSION CONTROL SYSTEM : EXH;EM/EVP;SP*
COMPLIANCE PERIOD :
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
ZENOAH AMERICA INC.
*1: The year will be changed every year of manufacturing.
*2: The initial number will be changed every year of
manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
1
S.O.R.E.
2
DISPL.: 22cc
3
50 HOURS