Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY

Battery

Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
The battery is disconnected and strapped into the battery tray for
shipment.
1.Remove the battery maintenance cover (see page 63).
2.Remove the battery strap from the bottom hook, and then remove
the battery.
3.Only remove the battery cables from the twist clip. 
Make sure that the 4-pin blue coupler harness is secured with the
twist clip. 
Charge the battery properly. See page 65.
Reinstall the battery.
4.Remove the protective cover from the battery positive (+) terminal,
and connect the positive (+) cable to the battery positive (+) 
terminal. Make sure to cover the terminal with the battery boot.
5.Connect the negative (–) cable to the battery negative (–) terminal.
6.Secure the battery by hooking the strap onto the bottom hook of the
generator.
BOTTOM
HOOK
POSITIVE (+) CABLE
7.Install the battery maintenance cover in the reverse order of removal
(see page 63).
Never operate the generator with the battery maintenance cover
open, as poor engine and generator performance will result.
84
BATTERY BOOT
BATTERY CABLES
4-PIN BLUE COUPLER HARNESS
BATTERY
TWIST CLIP
NEGATIVE (–) CABLE
BATTERY STRAP

Publicité

Table des Matières
loading

Table des Matières