Publicité
Hilti HIT-HY 270
Adhesive anchoring system for rebar and anchor fastenings.
For use in hollow and solid masonry of clay brick, concrete block and multi wythe wall.
Hilti HIT-HY 270
Contains: methacrylates, dibenzoyl peroxide, boric acid
Danger
H315
H317
H319
H360
H400
H412
P262
P280
P302+P352
P305+P351+P338
P333+P313
P337+P313
Disposal considerations
Empty packs:
▶ Leave the mixer attached and dispose of via the local Green Dot recovery system
code: 150102 plastic packaging
Full or partially emptied packs:
▶ Must be disposed of as special waste in accordance with official regulations.
EAK waste material code: 08 04 09* waste adhesives and sealants containing organic solvents or other dangerous
substances. or EAK waste material code: 20 01 27* paint, inks, adhesives and resins containing dangerous
substances.
Warranty: Refer to standard Hilti terms and conditions of sale for warranty information.
Failure to observe these installation instructions, use of non-Hilti anchors, poor or questionable base material
conditions, or unique applications may affect the reliability or performance of the fastenings.
Content:
11.1 fl.oz. / 330 ml
Weight:
20.8 oz / 590 g
42
Printed: 14.05.2018 | Doc-Nr: PUB / 5380359 / 000 / 01
Causes skin irritation.(A)
May cause an allergic skin reaction.(A,B)
Causes serious eye irritation.(A)
May damage fertility or the unborn child.(A)
Very toxic to aquatic life (B)
Harmful to aquatic life with long lasting effects.(A)
Do not get in eyes, on skin, or on clothing.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
16.9 fl. oz / 500 ml
28.9 oz / 820 g
or EAK waste material
Publicité
