Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
xFUME ADVANCED US
3 On the control panel, set the Auto On/Off switch (3) to "On".
Fig. 5 Control elements/ports on page EN- 13
7 Operation
WARNING
Health risk due to harmful dust
Before and during operation, please observe the following:
• During operation, the complete extraction system must be kept closed.
• After switching off the extraction system, wait at least one minute before opening the dust collecting drawer.
CAUTION
Risk of injury
Injuries may be caused by improper handling.
• Do not draw in any flammable substances or liquids.
• Ensure sufficient ventilation while operating the extraction system.
6.1 Transport and installation on page EN- 10
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Consult the documentation for the welding components.
6 Putting into operation on page EN- 10
Fig. 5 Control elements/ports on page EN- 13
1 Set the Device On/Off switch (4) on the extraction system to the "On" position.
7.1 Control elements/ports
1
Service LED
2
Power LED
3
Auto/Manual switch
Fig. 5
Control elements/ports
BAL.0814.0 • 2020-06-17
1
2
12
11
10
9
8
4
Device On/Off
7
5
Fuse 1
8
6
Fuse 2
9
3
4
5
6
7
Power cable
10 Power Adjustment
Compressed air-connection
11 Current clamp connection 1
Hour meter
12 Current clamp connection 2
7 Operation
EN - 13
Publicité
Table des Matières
