Abicor Binzel XFUME ADVANCED US Mode D'emploi page 15

xFUME ADVANCED US
9.2 Replacing the turbines
3)
7)
Fig. 6 Replacing the filter cartridges
1 Turn off the extraction system by setting the Device On/Off switch (4) to "Off" (Fig. 5).
2 Pull out the mains plug (no Fig.).
3 Undo the screws and remove the cover.
4 Remove the stand-offs and lift the motor cover.
5 Remove the ground wire from terminal post (no Fig.).
6 Remove the turbine holders.
7 Lift the turbine clamp-spacers from the top of the motors and remove the electrical spade connectors.
8 Remove the turbines. Insert the new turbines ensuring they are centered on the base.
9 Reverse the steps above to reassemble the system (no Fig.).
BAL.0814.0 • 2020-06-17
4)
8)
9 Maintenance and cleaning
6)
EN - 15