Télécharger Imprimer la page

Grizzly Tools BRM 4013 Traduction De La Notice D'utilisation Originale page 73

Tondeuse à gazon à essence

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
16 Rear and side impact protec-
tion
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
Technical Specifications
Petrol lawn mower ..................BRM 4013
Engine .............................. Rato RAV125-s
Engine size ............................ 127 cm
Power input.................... 1.9 kW (2,58 PS)
Blade rotation speed (n
Blade torque .......................... max. 45 Nm
Petrol tank volume .............................. 0.8 l
Octane rating ....................................95-98
Engine oil tank volume ................... 300 ml
Motoroil ................................. SAE 10W-40
Spark plug ....................... TORCH F5RTC
Cutting circle .............................
Cutting height ..............3-stage, 25-65 mm
Grass collection box volume................ 40 l
Weight ..............................................19 kg
Sound pressure level
(L
) ..................... 82.9 dB(A); K
pA
Sound power level (L
measured ...... 94.3 dB(A); K
guaranteed ...............................96 dB(A)
Vibration at the handle
(a
) ....................... 4.99 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
(cc)
3
) . max. 2900 min
0
ø
400 mm
= 3 dB
pA
)
WA
= 1,84 dB
WA
; K=1.5 m/s
2
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
-1
on but running without any load).
Symbols and icons
Symbols on the device
Attention!
Read the instruction manual.
Risk of injury from parts being
flung out.
Keep bystanders away from the
equipment.
Caution – toxic fumes!
Do not operate the equipment in
enclosed areas.
2
Caution – petrol is flammable!
Do not smoke and keep away from
heat sources.
Risk of injury from sharp blades.
Keep feet and hands away.
Before maintenance work, switch
off the engine and take out the
spark plug connector.
GB
73

Publicité

loading