SilverCrest STKK 16 B1 Mode D'emploi page 21

Write on one of the nameplates e. If marking
♦
the nameplate e by hand, we recommend
using a waterproof pen.
Pull the nameplate cover 9 upwards away from
♦
the transmitter and place your nameplate 8
into the recess in the transmitter.
Place the nameplate 9 back onto the transmitter.
♦
♦ Place the transmitter on the wall bracket 0 so
that the retaining tabs on the wall bracket 0
protrude into the two openings on the back of
the transmitter. Then slide the transmitter towards
the ringer button 7 so that the retaining tabs
glide into the openings and the transmitter sits
firmly on the wall bracket 0 (see fig. 2).
Fig. 2
│
■ 18
GB │ IE
STKK 16 B1