When you are using solvent-based adhesives be sure to provide good ventilation in your
workroom.
Read the manufacturer's instructions.
Radio control system
We particularly recommend computer radio control systems, from the mc-12 to the mc-24.
[Abb.]
or
[Abb.]
Recommended servos:
Rudder
Elevator
Inboard camber-changing flaps
Outboard camber-changing flaps
Ailerons
Aero-tow release
Retractable wheel
Throttle (electric version only)
Servo extension leads
Order No. 3935.180
Order No. 3935.50
Order No. 98516.1
Order No. 98516
We recommend the receiver battery, Order No. 2568, or larger. The battery should be
properly prepared before use, and maintained during use, i.e. the pack must be charged
and discharged (cycled) several times before it reaches its full stated capacity.
We deliberately recommend the use of rechargeable batteries for the receiver and
transmitter, as they offer the widest margin of safety in use.
Please see the main FS catalogue for details of suitable battery chargers.
The servo extension leads can be connected at the root ribs using MG-6 plugs and
sockets, Order No. 2978 / 2979; alternatively extension leads can be soldered to the servo
leads. Insulate each individual soldered joint with heat-shrink sleeving.
Use foam rubber to pack round the receiver, e.g. Order No. 1665.
Electric power system and accessories
Motor
Propeller
Order No.
Order No.
COMPACT 655
45 x 25 cm
20 V
1336.45.25
7722
GRAUPNER GmbH & Co. KG
We reserve the right to introduce modifications. No liability for printing errors.
DS 8231
DS 368
DS 8231
DS 3728
DS 3728
C 4621
C 713
COMPACT CONTROL 80
for the rudder
for connecting extension
leads to the receiver
Folding ferrite ring
Folding ferrite ring
Flight battery
Order No.
LiPo battery 3/3200
11.1 V / 3.2 Ah
7650.3 (2 required) or
LiPo battery 3 / 4800
D-73230 KIRCHHEIM-TECK
Speed controller
Order No.
COMPACT
CONTROL 80
OPTO / BRAKE
7186
8
Order No. 5155
Order No. 5162
Order No. 5155
Order No. 5157
Order No. 5157
Order No. 5126
Order No. 3887
Order No. 7186
1 required
6 required
1 required
1 required
Spinner
Battery link
Order No.
lead
Order No.
Precision
3031
spinner
6060.6
GERMANY
05/2006