Home Connect; Setting Up - Siemens TI955 Mode D'emploi

o

Home Connect

T his fully automatic coffee machine is
H o m e C o n n e c t
Wi-Fi-capable and can be remotely
controlled using a mobile device (e.g.
tablet, smartphone).
The Home Connect app offers extra
functions that complement the
networked appliance perfectly. If the
appliance is not connected to the WLAN
network (home network), it functions in
the same way as a fully automatic
coffee machine with no network
connection and can be operated as
usual via the display.
Important:
The home network router must be
operated in the 2.4 GHz frequency
range (band: 100 mW max.). Please
check and adjust it if necessary.
The availability of the Home Connect
function depends on the availability of
Home Connect services in your country.
Home Connect services are not
available in every country.You can find
more information on this at
www.home-connect.com.
Note: Please ensure that you follow the
safety instructions given at the
beginning of this instruction manual and
that they are also observed when
operating the appliance via the Home
Connect app and when away from
home. Please also follow the
instructions in the Home Connect app.
Operation on the appliance itself always
takes priority, and during this time it is
not possible to operate the appliance
using the Home Connect app.

Setting up

To implement settings via Home
Connect, you must have installed the
Home Connect app on a mobile device
(e.g. tablet PC, smartphone).
When doing so, observe the Home
Connect installation instructions
supplied, which are also available to
download in additional languages at
http://www.siemens-home.com.
Follow the steps specified by the app to
implement the settings.Login of the
appliance in the WLAN network can be
carried out on initial set-up of the fully
automatic coffee machine either directly
or using the menu (press $/± button to
open "Menu"):
1. Turn the rotary selector to the left
and select "Home Connect setting".
Press the rotary selector.
2.
The display shows the Home
3.
Connect menu, with "Turn on Wi-Fi"
highlighted in colour.
Press the right-hand navigation
4.
button under "select" to start the
radio link.
Use the rotary selector to select
5.
"Connect to network".
Press the right-hand navigation
6.
button under "select".
7. The following selection appears:
" Connect automatically" and
" Connect manually".
Note: If the router has WPS
functionality, please select "Connect
automatically", otherwise use "Connect
manually".
Home Connect en
67