Würth master EWS 115 Instructions D'emploi page 19

All manuals and user guides at all-guides.com
OBJ_BUCH-413-004.book Page 19 Thursday, June 26, 2008 9:08 AM
Protection Guard for Cutting
❏ For cutting metal, always work with the
protection guard for cutting 8.
The protection guard for cutting 8 is mounted in the
same manner as the protection guard for sanding 7.
Auxiliary Handle
❏ Operate your machine only with the auxil-
iary handle 5.
Screw the auxiliary handle 5 on the right or left of the
machine head depending on the working method.
Vibration-dampening Auxiliary
Handle
The vibration-dampening auxiliary handle reduces
the vibrations, making operation more comfortable
and secure.
❏ Do not make any alterations to the auxil-
iary handle.
Do not continue to use an auxiliary handle if
it is damaged.
Hand Guard
❏ For operations with the rubber sanding
plate 15 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 14.
The hand guard 14 is fastened with the auxiliary
handle 5.
Mounting the Grinding Tools
❏ Before any work on the machine itself,
pull the mains plug.
❏ Grinding and cutting discs become very
hot while working; do not touch until they
have cooled.
Clean the grinder spindle 6 and all parts to be
mounted.
For clamping and loosening the grinding tools, lock
the grinder spindle with the spindle lock button 2.
❏ Actuate the spindle lock button only when
the grinder spindle is at a standstill. Oth-
erwise, the machine may become damaged.
Grinding/Cutting Disc
Pay attention to the dimensions of the grinding tools.
The mounting hole diameter must fit the mounting
flange without play. Do not use reducers or adapt-
ers.
26.6.08
When using diamond cutting discs, pay attention
that the direction-of-rotation arrow on the diamond
cutting disc and the direction of rotation of the
machine (see direction-of-rotation arrow on the
machine head) agree.
See graphics page for the mounting sequence.
To fasten the grinding/cutting disc, screw on the
clamping nut 11 / 13 and tighten with the two-pin
Quick-clamping Nut
spanner; see Section "
❏ After mounting the grinding tool and
before switching on, check that the grind-
ing tool is correctly mounted and that it
can turn freely. Make sure that the grind-
ing tool does not graze against the pro-
tection guard or other parts.
An O-ring (plastic part) is inserted
in the mounting flange 9 around
the centring collar. If the O-ring
is missing or is damaged, it
must in all cases be replaced
before the mounting flange 9 is
mounted.
Flap Disc
❏ For operations with the flap disc, always
mount the hand guard 14.
Rubber Sanding Plate
❏ For operations with the rubber sanding
plate 15, always mount the hand guard
14.
See graphics page for the mounting sequence.
Screw on the round nut 17 and tighten with the two-
pin spanner.
Cup Brush/Disc Brush
❏ For operations with the cup brush/wheel
brush, always mount the hand guard 14.
See graphics page for the mounting sequence.
The cup brush/disc brush must be able to be
screwed onto the grinder spindle until it rests firmly
against the grinder spindle flange at the end of the
grinder spindle threads. Tighten the cup brush/disc
brush with an open-end spanner.
".
English–19