Publicité
Les langues disponibles
Les langues disponibles
4.
Close any applications that are running on your
computer system.
5.
Insert the Starter CD into the CD drive.
If the CD menu does not start automatically,
double-click the setup icon on the Starter CD.
6.
On the CD menu, click Install and follow the
onscreen instructions to install the printer software.
To set up wireless communication
for multiple printers (Windows only)
The printer supports the Windows Connect Now™
technology, which allows you to conveniently set up
multiple printers for wireless connection. Using the
Wireless Configuration Utility provided, export the
computer's wireless settings to a USB flash drive,
and then configure the printers with these settings by
inserting the flash drive into the USB port of each printer.
1.
Remove the protective cover from the printer's USB
host connector.
2.
Insert the Starter CD into the CD drive.
If the CD menu does not start automatically,
double-click the setup icon on the Starter CD.
Troubleshooting problems for wireless communication
If the printer is unable to communicate with the network after completing the wireless setup and software installation,
perform one or more of the following tasks.
Check the wireless
communication settings
•
Make sure the computer's wireless card is set to the
correct wireless profile. A wireless profile is a set of
network settings unique to a given network. A single
wireless card might have several wireless profiles
(for example, one for a home network and one for
an office network). Open the configuration utility for
the network card installed on your computer, and
ensure that the profile selected is the profile for the
printer's network.
•
Make sure the printer's network settings match those
of your network. Do one of the following to find the
settings for your network:
•
Infrastructure communication: Open the wireless
access point's (WAP) configuration utility.
•
Ad hoc communication: Open the configuration
utility for the network card installed in your
computer.
•
Compare the network's settings to those that appear
on the printer's configuration page (see "To print a
configuration page" on page 21), and note any
differences. Possible problems include the following:
24
3.
On the CD menu, click Utilities, and then click
Wireless Configuration Utility.
4.
Follow the onscreen instructions and connect the
USB flash drive to the computer's USB port when
prompted. The wireless network configuration
settings are saved to the flash drive.
5.
Follow the onscreen instructions and connect the
USB flash drive to each printer that you want to add
to the network.
•
The WAP filters hardware addresses
(MAC addresses). See "Add hardware
addresses to a wireless access point (WAP)" on
page 25.
•
One of these settings in the printer might be
incorrect: communication mode, network name
(SSID), channel (ad hoc networks only),
authentication type, encryption.
See "Understanding 802.11 wireless network
settings" on page 22.
•
Print a document. If the document still does not
print, then reset the printer's network settings
(see "Reset network configuration settings" on
page 25) and reinstall the printer software
(see "Setting up the printer for wireless
communication (HP Officejet Pro K550dtwn)" on
page 22).
If the wireless network settings are correct, the computer
might be associated to another wireless network.
Ensure that the computer is associated to the same
wireless network as that of the printer.
Users can ensure this by checking the wireless settings
on their respective computers. In addition, ensure that
the computers have access to the wireless network.
Publicité
