Publicité
Les langues disponibles
Les langues disponibles
12. Remove locking pin and pull up on link and then out on handle and release link then slide
hitch assembly into maneuver position to ensure it slides without binding.
15. If it does move without binding then proceed to next step, if it does not, go back to step 10.
16. Return the handle to the driving position and slide the hitch assembly forward until it stops
moving and the stops are engaged.
17. Center pivot plate left to right and also ensure that the pivot stops are straight relative to the
side of the housing and then tighten the 1/4" bolts to 8 lbs.-ft.
Visit
www.huskytow.com
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/25/2021-Rev10
or 1 (877) 544-4449 for Warranty Information / Tech Support / Product Updates.
Page-9
Publicité
