Publicité
Les langues disponibles
Les langues disponibles
To Maneuver:
The "HUSKY 10-16K" has an "anti-bind" feature that will allow you to change the
locking handle position if the pivot stops are in a bind.
1.
Align trailer and tow vehicle in a straight line on a level surface.
2.
Pull up on link and out on handle then release link.
Views showing pull handle and system in maneuver position.
3.
When the handle is put into the maneuver position, make note whether the pivot stops rotated
or not. If they did then proceed to step 5.
4.
If the pivot stops did not rotate, then you will need to set the trailer brakes and then back the
tow vehicle up slightly until you hear the pivot stops actuate. Then proceed to step 5.
5.
Set the trailer brakes and slowly pull the tow vehicle forward until the "HUSKY 10-16K" stops
moving and you hear the pivot stops engage.
View showing pivot stops in the maneuver "locked" position from inside of the driver side
Visit
www.huskytow.com
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/25/2021-Rev10
OPERATING INSTRUCTIONS
Front of Tow Vehicle
assembly
or 1 (877) 544-4449 for Warranty Information / Tech Support / Product Updates.
Page-12
Publicité
