Publicité
Les langues disponibles
Les langues disponibles
Partial top View of hitch assembly, some components removed to clarify instructions.
16. Check rotation of pivot plate and pivot stops to ensure it moves freely without binding.
17. With the hitch assembly in the driving position adjust the pivot stop surface so it just touches
the stop tab by loosening the jam nut on the clevis/yoke; remove the cotter pin and clevis pin
from the clevis that is furthest forward. Swing the clevis/yoke that is attached to the threaded
shaft inwards away from the curved plate. Turn the clevis/yoke clockwise or counterclockwise
to align the holes properly between the curved plate and the holes in the clevis/yoke as shown
on page 13.
Visit
www.huskytow.com
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/25/2021-Rev10
or 1 (877) 544-4449 for Warranty Information / Tech Support / Product Updates.
Page-10
Publicité
