Publicité
Les langues disponibles
Les langues disponibles
18. Re-install the clevis pin and the cotter pin.
19. Put the handle into the maneuver position and slide the hitch assembly into the maneuver
position and confirm that the stop edge on the pivot stops touch the stop tab.
20. If all moves without binding and the pivot stop surface makes full contact with the stop tab in
both positions, then you are ready to complete the assembly by attaching the 5th wheel head
and related components. Ensure cotter pin legs are bent over to prevent them from falling
out.
Visit
www.huskytow.com
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/25/2021-Rev10
or 1 (877) 544-4449 for Warranty Information / Tech Support / Product Updates.
Page-11
Publicité
