Publicité
Les langues disponibles
Les langues disponibles
7.
Remove 1/4" clevis pin from other clevis/yoke on compression cylinder assy.
8.
Align holes in clevis/yoke to hole in curved link plate. Insert clevis pin through holes and
secure with cotter pin (Do not bend over legs of cotter pin yet).
9.
Push entire hitch assembly forward until there is no movement.
10. Install cross member and ensure it is centered and straight by shimming (if necessary) and
then torque bolts to 75 lbs.-ft. Note: Multiple Shims can be stacked together if gap width is
large.
Shim Location
A portion of the
housing was
removed for clarity
Visit
www.huskytow.com
2021 Keystone Automotive Operations Inc. All Rights Reserved. 08/25/2021-Rev10
or 1 (877) 544-4449 for Warranty Information / Tech Support / Product Updates.
Shim Location
Page-7
Publicité
