Publicité
Les langues disponibles
Les langues disponibles
A
B
C
D
E
F
Start-up
Before the start-up close the draining connection e.g. by screwing the valve in and
make sure that the installation procedures have been carried out in accordance with the
regulations included in this manual.
Cylinder must be filled with water:
-
turn on the valve on cold water supply pipe,
-
turn on the hot water outlet valve (water outflow without the air bubbles indicates
that the storage is full),
-
turn off the outlet valves.
Turn on the valves connecting cylinder with the central and the solar collector heating
system. Check for water and heating medium leaks. Check out the safety valve performance
in accordance with valve manufacturer's instruction.
Cylinder emptying
In order to empty the cylinder:
•
turn off the valves which connect cylinder with central heating system,
•
turn off the valve on the cold water inlet,
•
turn on the drain valve.
24
Dimensions SWP
200
258
993
1290
1610
127
1464
300
241
1071
1313
1615
Publicité
