Product Safety - Abicor Binzel ROBO 241 Mode D'emploi

2 Safety
2.4 Warnings

2.5 Product safety

EN - 6
In these operating instructions, potentially hazardous work steps are preceded
by the following warnings. Arranged in descending order of danger, they
mean:
DANGER
Describes an imminent threatening danger. If not avoided, it will result in
fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTICE
Describes the risk of impairing work results or the risk that may result in
material damage to the equipment.
• The product has been developed and manufactured in accordance with
state-of-the-art methods and the recognized safety standards and
guidelines. These operating instructions warn you against unavoidable
residual hazards for user, third parties, devices or other material property.
The disregarding of these warnings may result in risk to the life and health
of personnel, environmental damage or material damage.
• The product may only be operated in unchanged and technically perfect
condition, within limits described in these instructions.
• Always observe limit values specified in the technical data. Overloading
leads to torch destruction.
• Safety devices on the device may never be dismounted, bridged or
avoided in another manner.
• During welding work outdoors, use suitable protection against the effects
of weather.
• Check the electrical device for any damage and for proper functioning in
accordance with its designated use.
MIG/MAG ROBO welding torch