Abicor Binzel ROBO 241 Mode D'emploi page 23

MIG/MAG ROBO welding torch
1 Identification
1
1 Torch neck
2 Cable support
Fig. 1 Product overview
The ready-to-use MIG/MAG welding torch consists of:
• Cable assembly with equipment
• Cable support
• Torch neck, e.g. ROBO 455 with equipment and wear parts.
Together, the components form a fully-functional unit that provides an arc for
welding when supplied with the appropriate consumables. For welding, a wire
electrode is fed through the welding torch system and the arc and the molten
pool are protected by the inert gas (MIG) and the active gas (MAG). The wire
electrode is a consumable solid or fluxed-core wire fed through the contact tip.
The contact tip transfers the welding current to the wire electrode. The arc is
formed between the wire electrode and the workpiece.
.
2
3 Nameplate
3 4
4 Cable assembly with equipment
1 Identification
EN - 3