Connection And Communication With The Pc; Downloading Application - Trek RIDE+ Manuel Du Propriétaire

Connection and communication with the PC

„ Downloading application
You need E-tube Project to configure SHIMANO STePS and update firmware.
Download an E-tube Project from the support website (http://e-tubeproject.shimano.com). For information on how to install
an E-tube Project, check the support website. For information on how to operate the PC, refer to the help manual on the
E-tube Project.
• You need SM-PCE1 and SM-JC40 / JC41 to connect SHIMANO STePS to a PC.
• Firmware is subject to change without notice.
If necessary, contact the place of purchase.
EN-28