Trek RIDE+ Manuel Du Propriétaire page 17

Removing the battery
<BT-E6000>
Turn off the power, then turn the key to the unlocking
position, and pull out the battery.
You can remove the battery only when the key is in the unlocking
position.
<BT-E6010>
Turn off the battery then turn the key to the unlocking
position. Hold the upper part of the battery and slide it
to the left to remove it.
Installation of the battery
<BT-E6000>
1.
Set the battery on the holder rail from behind and
slide it forward.
Push it in firmly.
2.
Return the key to the locking position, remove it, and
store it in a safe place.
CAUTION
Check that the battery is locked before riding the bicycle.
EN-14
Rail