Publicité
All manuals and user guides at all-guides.com
UK
WESTFIRE· WF37
CONTROLS ON WESTFIRE UNIQ 37
Door operation
Whenopening the doorof your Westfire stovealways wear the glovethat is providedto protect your hand from
possible heat. Thehandle pulls out right away from the fire. Whenshutting the doorpush the doorclosed and push
the handle until the handle firmly closes.
WOOD FUEL
IMPORTANT
:Neveruse toxicwood suchas chipboard,impregnated orpainted wood.
Goodquality wood is the most important factorin your stoveworking efficiently and cleanly. Always use dry
firewood. Thedryness of the firewood plays an important role since the use of wet woodresults in poorfuel
economyand may causea tarry sooty film onthe internals of the stove.
Newly cut wood contains60-70% water, making it totally unsuitable foruse as firewood.
Newly cut wood should be stacked and air dried undercoverfor two years beforebeing used as firewood.
SOLID SMOKELESS FUELS– Westfire stoves are only CE/EN/HETAStested and approved for wood. It is possible,
however, to use other types of fuel with duecare. Whenusing coal/smokeless fuel youmust use a coal insert and
a mix of 80% wood, 20% coal. Please notecoalreducesthe lifetime of the stoveand the chimney considerably.
PETROLEUM COKE IS NOT SUITABLE FOR USE ON THIS STOVE;ITS USE WILL INVALIDATE THE GUARANTEE
Overnight burning
Westfire stovesare wood stoves, wood burnsmoreefficiently and cleanly if is burnt hotter.Westfiredo not
recommendthat their stovesare burnt overnight forthis reason.
As a night time regime we recommendthat the fire is loadedwhen hot and burnt for five minutes with the
secondary air valve fully openuntil the new woodhas taken and is burning, then closethe secondary air valve to
its operational position.
Onreturning to the stovein the morning the fire will have burnout, reloadwith somepaperorfirelighter and some
kindling and openall the values fully openand the stovewill relight quickly.Beware as the ash bed will have hot
embers.
Use ofoperatingtools
Always usethe operating toolsprovided when handling parts likely to be hot when the stoveis in use.
Maintenance
UNIQ37 wood stoveneedsto have the ash removedfrom the stoveat regularintervals. Makesure the stoveis
completely cold before cleaning out ash (embers canremain hot forover24 hours).
To clean the outside of the stove use a dry cloth.
Annual service
Theinside of the stove should be serviced /cleaned oncea year. T oclean the inside, removeall ash, soot and tar
residue from the combustionchamber.Removeinsulated chamberpanels and baffle, dirt and soot will collect
behind it and this must be cleaned out. Insulated panels may crackif hit too hard by a piece of firewood. Thishas no
effect onthe function of the stove(this is notthe case with the smokeplate). TheInsulated panels will only need to
bereplaced oncethey becomevery worn and are no longerwhole, orif they crackin several places. Checkglass is
correctly positioned,replace stove doorrope cordin the door.Checkglass is correctly positioned.
Thestove, the flue pipeconnectionand the chimney should be checked regularly by a qualified engineer. The
chimney shouldalso bechecked for blockages beforerelighting the stove if it has not beenused for an extended
period of time.
Thepaint/ lacquer canwear thin in exposedplacesdueto overheating. This, and otherlacquerdamage, may be
repaired using a WestfireSenotherm paint/lacquer spray available fromyour Westfiredealer.
Ash must be stored in a non-combustiblecontainerand must not bemixed with othercombustiblewaste.
13
Publicité
