Publicité
Les langues disponibles
Les langues disponibles
10. Maintenance
The Mini Dry Bath Incubator may be cleaned with a moist cloth containing a mild soap solution. The
heating chamber and metal blocks are constructed of aluminium alloy and may be cleaned with any
commercial aluminium cleaners available on the market.
The heating surface contains a PTFE coating. Please avoid contact with sharp objects.
11. Ordering information
N2400-4020
N2400-4021
N2400-4022
N2400-4023
N2400-4024
N2400-4025
N2400-4026
*Metal blocks are not included and must be purchased separately.
Please see our website www.starlabgroup.com for information on our wide range of consumables
including microcentrifuge tubes, centrifuge tubes and PCR tubes.
12. Warranty
The Mini Dry Bath Incubator is under warranty against defects in materials and workmanship under normal
service, for two years from the shipping date to the purchaser. This warranty excludes damages resulting
from transport, misuse, carelessness, or neglect. STARLAB's liability under the warranty is limited to the
receipt of reasonable proof from the customer that the defect is embraced within the terms of the warranty.
All claims made under this warranty must be presented to STARLAB or a STARLAB Distributor within two years
following the date of delivery of the product.
Mini Dry Bath Incubator*
Mini Dry Bath Metal Block for 32 x 0.2 ml PCR Tubes (ø 6.35 mm)
Mini Dry Bath Metal Block for 12 x 0.5 ml Microcentrifuge Tubes (ø 8.0 mm)
Mini Dry Bath Metal Block for 12 x 1.5 ml Microcentrifuge Tubes (ø 10.8 mm)
Mini Dry Bath Metal Block for 12 x 1.5/2.0 ml Microcentrifuge Tubes (ø 10.9 mm)
Mini Dry Bath Metal Block for 6 x 15 ml Centrifuge Tubes (ø 17.3 mm)
Mini Dry Bath Metal Block for 2 x 50 ml Centrifuge Tubes (ø 29.2 mm)
Mini Dry Bath Incubator
9
Publicité
