Publicité
Les langues disponibles
Les langues disponibles
Cleaning
DANGER
►
Always remove the plug before cleaning the device . There is the risk of an
electric shock! .
►
When you are cleaning the device ensure that no moisture gets inside it, so
as to avoid irreparable damage to it .
IMPORTANT
►
Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces .
Cleaning the housing
♦
Clean the surfaces of the device with a soft, dry cloth . For stubborn soiling
use a lightly moistened cloth .
♦
Never clean the insides of the charging slots with moist cloths . Instead, use a
clean soft brush to clean them .
♦
If soiled, clean the charging contacts with a dry cloth .
Troubleshooting
In this section you will receive important information for the localisation and
remedying of malfunctions .
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect
The battery
charger is not
functioning .
The inserted batte-
ries are not being
charged .
NOTICE
►
If you cannot solve the problem with the aforementioned methods, please
contact Customer Services .
TLG 1000 D6
Possible cause
The power cable is not
plugged in .
Mains power socket is not
supplying power .
The batteries are not inserted
as per their polarity .
The inserted batteries are
not suitable for charging .
The temperature monitoring
was initiated .
Solution
Insert the power cable into a mains
power socket .
Check the circuit fuse .
Insert the batteries as per their polarity
(see marking in the charging slot) .
Insert exclusively rechargable Ni-Cd
and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batte-
ries .
Disconnect the plug from the mains
power socket and allow the device to
cool down .
GB │ IE
│
■
23
Publicité
