Precision TA500 Manuel D'utilisation page 8

5. . On the long side of the Axle place a 3/4" Flat Washer followed by an Axle Spring and then another 3/4" Flat
Washer. Followed by a 3/4" Flat Washer an Aerator Star, another 3/4" Flat Washer and a 1" x 3" Spacer. Repeat the
process five more times. Then place a 1" x 1/2" Spacer onto the Axle. See Figure 5.
3/4" Flat Washer
3/4" Flat Washer
Figure 5
Figure 5
Aerator Star
Aerator Star
Axle
Axle
Spring Spring
1' x 3" Spacer
1' x 3" Spacer
Aerator Star
Aerator Star
1" x 1/2" Spacer
1" x 1/2" Spacer
8
3/4" Flat Washer
3/4" Flat Washer