Precision TA500 Manuel D'utilisation page 5

3.. On the short side of the Axle, place two 3/4" Flat Washer onto the Axle, followed by an Axle Spring and then an-
other 3/4" Flat Washer, followed by an Aerator Star and then another 3/4" Flat Washer onto the Axle. Place a 1" x 3"
Spacer onto the Axle, a 3/4" Flat Washer another Aerator Star and another 3/4" Flat Washer repeat this process three
more times. Now place a 1" x 2" Spacer onto the Axle followed by another 3/4" Flat Washer. See Figure 3.
Figure 2
Figure 2
Center Plate
Center Plate
1" x 2" Spacer
1" x 2" Spacer
3/4" Flat Washer
3/4" Flat Washer
5
3/4" Axle 3/4" Axle
Bushing
Bushing